Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2006 -2007 Kia Rio 5 . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
GREEN (+) OR BLUE (+)
IGNITION SWITCH HARNESS
STARTER
WHITE (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
N/A
IGNITION
1
PINK (+)
IGNITION SWITCH HARNESS
IGNITION
2
N/A
N/A
IGNITION
3
N/A
N/A
ACCESSORY/HEATER
BLOWER 1
ORANGE (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
YELLOW (+)
IGNITION SWITCH HARNESS
KEYSENSE
BLUE (+)
PLUG NEXT TO IGNITION SWITCH
PARKING
LIGHTS ( - )
N/A
N/A
PARKING
LIGHTS ( + )
BLACK (+)
IN 14 PIN PLUG IN FRONT OF FUSE BOX
POWER LOCK
BLUE (-) TYPE
18 PIN CONNECTOR AT TOP OF FUSE BOX
POWER UNLOCK
YELLOW/BLACK (-) TYPE
18 PIN CONNECTOR AT TOP OF FUSE BOX
DOOR TRIGGER
BLUE (-)
10 PIN CONNECTOR FRONT OF FUSE BOX
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER
TRUNK RELEASE
N/A
N/A
SLIDING
POWER DOOR
N/A
N/A
HORN
BLUE (-)
AT STEERING COLUMN HARNESS
TACH
GREEN SEE NOTE *
AT PCM
WAIT TO
START LIGHT
N/A
N/A
BRAKE
RED/ORANGE (+)
AT SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
WHITE/BLACK (-) SEE NOTE **
AT BCM
ANTI-THEFT
TRANSPONDER ANTI-THEFT
TRANSPONDER @ IGNITION SWITCH TUMBLER
EXTRA
INFORMATION
NOTE * THE PCM IS LOCATED ON PASSENGER FENDERWELL.
NOTE ** THE BCM IS LOCATED IN CENTER CONSOLE TOWARDS FIREWALL.
