| NOTE *1 The KEYSENCE BLACK (-) wire can be used as a DISARM wire for the Factory Security, a constant (-) Negative to this wire will DISARM.
NOTE *2 TEST the LOCK and UNLOCK wires while turning the Key in the DRIVERS DOOR KEY CYLINDER.
NOTE *3 The DRIVERS DOOR is a BLUE (-) at the BECU, 16-Pin Plug, Pin 14. The PASSENGER DOOR is a BLUE (-) at the BECU 28-Pin Plug, Pin 23. The DRIVERS REAR DOOR is a GRAY (-) at the BECU, 16-Pin Plug, Pin 16. And the PASSENGER REAR DOOR is BLACK (-) Pin 7, in a 13-Pin Plug on the RIGHT SIDE of the FUSE BOX. When connecting to an ALARM SYSTEM use all 4 wires and DIODE ISOLATE, See DIAGRAM.
|