Vehicle
Wiring Details for your
2005-2009 Land Rover Lr 3 Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2005-2009 Land Rover Lr 3 . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
BROWN (+), 30 AMP |
@ IGNITION SWITCH, (BLACK, 7-PIN PLUG), PIN 4 |
| STARTER |
WHITE/RED (+) |
@ IGNITION SWITCH, (BLACK, 7-PIN PLUG), PIN 7 |
| STARTER
2 |
N/A |
|
| IGNITION
1 |
YELLOW (+) |
@ IGNITION SWITCH, (BLACK, 7-PIN PLUG), PIN 1 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
WHITE (+) |
@ IGNITION SWITCH, (BLACK, 7-PIN PLUG), PIN 6 |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
N/A |
|
| PARKING
LIGHTS ( + ) |
RED/WHITE (+) |
@ CJB, (GREEN, 30-PIN PLUG), PIN 24, NOTE #1 |
| POWER LOCK |
PINK/RED (-), TYPE B |
@ CJB, (GREEN, 30-PIN PLUG), PIN 27, NOTE #1 |
| POWER UNLOCK |
YELLOW/PINK (-), TYPE B |
@ CJB, (GREEN, 30-PIN PLUG), PIN 20, NOTE #1 |
| DOOR TRIGGER |
BLACK/BROWN (+) |
@ CJB, (REAR, BROWN, 32-PIN PLUG), PIN 9, NOTE #1 |
| DOMELIGHT
SUPERVISION |
PURPLE (+) |
@ CJB, (BROWN, 46-PIN PLUG), PIN 3, NOTE #1 |
| TRUNK RELEASE |
NOTE #2 |
@ CJB, (GREEN, 30-PIN PLUG), PIN 4, and (REAR, BROWN, 32-PIN PLUG), PIN 15, NOTE #1 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
PURPLE/ORANGE (-) |
@ CJB, (GREEN, 30-PIN PLUG), PIN 23, NOTE #1 |
| TACH |
NOTE #3 |
@ Any FUEL-INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
GREEN/PURPLE (+) (TEST with IGNITION KEY ON) |
@ CJB, (REAR, BROWN, 32-PIN PLUG), PIN 24, NOTE #1 |
| FACTORY
ALARM DISARM |
DISARMS with FACTORY REMOTE ONLY!! |
|
| ANTI-THEFT |
TRANSPONDER ANTI-THEFT SYSTEM, REQUIRES 791 BYPASS MODULE AND EXTRA IGNITION KEY |
@ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: the CJB (Central Junction Box), is part of the FUSE/RELAY BOX located behind the GLOVE BOX.
NOTE #2: to OPEN the UPPER TAILGATE us the PINK/GRAY (-) or to OPEN the LOWER TAILGATE use the BLACK/GRAY (-) TEST these wire while opening from the Handle on the Rear of the Vehicle.
NOTE #3: on GAS Engines use any wire NOT BROWN/RED, on DEISEL use any wire NOT with a GREEN STRIPE, ALL test (AC)
|
|
|
|
|
|
