NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(For Remote Starting Only) Part #791 Bypass, Requires Extra Key for Operation,
(For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for
Operation) 2-KEYS Required to Program Module.
To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: the DOOR LOCK/UNLOCK wires will only TEST when turning the key in the DRIVERS
DOOR KEY CYLINDER.
NOTE #3: the DRIVERS DOOR is a PINK to BLUE (-), the PASSENGER DOOR is a PURPLE to BLUE
(-), the DRIVERS REAR DOOR is a BLACK (-) and the PASSENGER REAR DOOR is a
GRAY (-) When connecting to an ALARM SYSTEM, use all 4 DOOR TRIGGER wires and
DIODE ISOLATE, to connect, See DIAGRAM
NOTE #4: the ECM (Engine Control Module) is located BEHIND the GLOVE BOX.
NOTE #5: this vehicle uses 2 STARTER/CRANK wires at the IGNITION SWITCH HARNESS,
when connecting to a Remote Starter, you must connect BOTH STARTER/CRANK
wires to the STARTER/CRANK wire from the Remote Starter.
|