Vehicle
Wiring Details for your
2005-2007 Ford Five Hundred Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2005-2007 Ford Five Hundred . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
RED (+) |
@ IGNITION SWITCH HARNESS |
| STARTER |
DARK GREEN (+) |
@ IGNITION SWITCH HARNESS |
| STARTER
2 |
N/A |
|
| IGNITION
1 |
LIGHT GREEN/PURPLE (+) |
@ IGNITION SWITCH HARNESS |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
GRAY/YELLOW (+) |
@ IGNITION SWITCH HARNESS |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
YELLOW (+) |
@ IGNITION SWITCH HARNESS |
| PARKING
LIGHTS ( - ) |
BLACK/LIGHT GREEN (-) |
@ SJM, Connector D, Pin 26, See NOTE #2 |
| PARKING
LIGHTS ( + ) |
BROWN/WHITE (+) |
@ SJB, Connector E, Pin 22, See NOTE #2 |
| POWER LOCK |
PINK/YELLOW (TYPE B) |
@ SJB, Connector C, Pin 3, See NOTE #2 |
| POWER UNLOCK |
PINK/LIGHT GREEN (TYPE B) |
@ SJB, Connector C, Pin 18, See NOTE #2 |
| DOOR TRIGGER |
BLACK/LIGHT BLUE (+) |
@ SJB, Connector E, Pin 7, See NOTE #2 |
| DOMELIGHT
SUPERVISION |
USE DOOR TRIGGER |
|
| TRUNK RELEASE |
PINK/ORANGE (-) |
@ SJB, Connector D, Pin 10, See NOTE #2 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
DARK BLUE (-) |
@ SJB, Connector B, Pin 7, See NOTE #2 |
| TACH |
Any wire that is NOT RED (AC) |
@ any IGNITON COIL or FUEL INJECTORS |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
RED/LIGHT GREEN (+) |
@ SJB, Connector A, Pin 8, See NOTE #2 |
| FACTORY
ALARM DISARM |
LIGHT BLUE/BLACK (-) |
@ SJB, Connector C, Pin 4, See NOTE #2 |
| ANTI-THEFT |
FORD'S ANTI-THEFT TRANSPONDER SYSTEM, SEE NOTE #1 |
TRANSPONDER @ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: This vehicle MAY BE equipped with a Special Anti-theft key, to remote start you will
need a Bypass module 791,(use this module IF you have a extra ignition key to
place inside the 791 to remote start, if you do not have an extra key to use or wish
not to have a key placed inside this bypass module, we OFFER a KEYLESS INTERFACE
BYPASS MODULE that does not require a key to be placed inside the bypass module,
this is Part # PKALL or PKFM, either one will work, to order, go to the INTERFACE
BYPASS MODULE PAGE on this website.
NOTE#2: The SJB (Smart Junction Box) is the FUSE/RELAY box under the Drivers side of dash.
|
|
|
|
|
|
