Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2005 -2007 Mazda Tribute . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
Connect to BATTERY
STARTER
TAN/LIGHT BLUE (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
LIGHT GREEN/PURPLE (+)
IGNITION SWITCH HARNESS
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
BLACK/LIGHT GREEN (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
WHITE/BLACK (-)
@ HEADLIGHT SWITCH
PARKING
LIGHTS ( + )
BROWN (+)
IN DRIVERS KICK PANEL
POWER LOCK
PINK/WHITE (1-Wire Door Lock System) See NOTE *1
IN DRIVERS KICK PANEL
POWER UNLOCK
Same wire, See DIAGRAM
See DAIGRAMS
DOOR TRIGGER
PINK (-)
IN DRIVERS KICK PANEL
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
YELLOW/LIGHT GREEN (-)
@ STEERING COLUMN HARNESS
TACH
Any wire NOT RED
@ IGNITION COIL
WAIT TO
START LIGHT
N/A
BRAKE
LIGHT GREEN (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
DARK BLUE/LIGHT GREEN (-)
IN DRIVERS KICK PANEL
ANTI-THEFT
FORD'S SECURILOCK ANTI-THEFT TRANSPONDER SYSTEM
TRANSPONDER @ IGNITION SWITCH TUMBLER
EXTRA
INFORMATION
NOTE *1 LOCK REQUIRES A (-) NEGATIVE THRU A 1,000 OHM RESISTOR. UNLOCK REQUIRES A STRIGHT (-)NEGATIVE, SOME UNITS REQUIRE 2 EXTRA RELAYS PART #R30-H, TO CONNECT, See DIAGRAMS
