NOTE *1 When Installing a REMOTE STARTER, you MUST use BOTH Starter #1 and Starter #2 wires. Both wires must be connected to the STARTER/CRANKING Output wire from the Remote Starter or the vehcile will NOT Remote Start when the Engine is cold.
NOTE *2 the BCM (Body Control Module) is located to the RIGHT of the STEERING COLUMN.
NOTE *3 the DRIVERS DOOR is a GRAY (-) PIN 47, the PASSENGER DOOR is a LIGHT GREEN (-) PIN 12, the DRIVERS REAR DOOR is a PINK (-) PIN 48 and the PASSENGER REAR DOOR is a BLUE (-) PIN 13, all are located at the BCM, When connecting to an ALARM SYSTEM, use all 4 DOOR TRIGGER wires and DIODE ISOLATE, to connect, See DIAGRAM
|