Vehicle
Wiring Details for your
2005- Audi Allroad Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2005- Audi Allroad . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
|
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
RED (+) |
@ IGNITION SWITCH, (8-PIN PLUG), PIN 3 |
STARTER |
RED/BLACK (+) |
@ IGNITION SWITCH, (8-PIN PLUG), PIN 5 |
STARTER
2 |
BLUE (+) |
@ IGNITION SWITCH, (8-PIN PLUG), PIN 1 |
IGNITION
1 |
BLACK (+) |
@ IGNITION SWITCH, (8-PIN PLUG), PIN 6 |
IGNITION
2 |
N/A |
|
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
YELLOW/BLACK (+) |
@ IGNITION SWITCH, (8-PIN PLUG), PIN 2 |
ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
N/A |
|
PARKING
LIGHTS ( + ) |
GREEN/BLACK(+)(Left) and GREEN/RED(+)(Right), Use both and Isolate, See NOTE #2 |
@ HEADLIGHT SWITCH, (17-PIN PLUG), PINS 13 and 14 |
POWER LOCK |
BLUE/WHITE (TYPE B) |
in DRIVERS KICK PANEL or CLCM, (20-PIN PLUG), PIN 14, NOTE #3 |
POWER UNLOCK |
GREEN/WHITE (TYPE B) |
in DRIVERS KICK PANEL or CLCM, (20-PIN PLUG), PIN 12, NOTE #3 |
DOOR TRIGGER |
GREEN/YELLOW (-) |
@ CLCM, (16-PIN PLUG), PIN 1, NOTE #3 |
DOMELIGHT
SUPERVISION |
BROWN/WHITE (-) |
@ CLCM, (12-PIN PLUG), PIN 2, NOTE #3 |
TRUNK RELEASE |
PURPLE/GREEN (+) |
@ RELEASE SWITCH or CLCM, (20-PIN PLUG), PIN 5, NOTE #3 |
SLIDING
POWER DOOR |
N/A |
|
HORN |
BLACK/YELLOW (+) |
@ DRIVERS DASH RELAY PANEL |
TACH |
Any wire NOT BLACK/BLUE (AC) |
@ Any FUEL-INJECTOR |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
RED/BLACK or RED/WHITE (+) |
@ BRAKE PEDAL SWITCH, (4-PIN PLUG), PIN 4 or 2 |
FACTORY
ALARM DISARM |
BROWN/YELLOW (-) (Requires Double Pulse) |
in DRIVERS KICK PANEL or CLCM, (12-PIN PLUG), PIN 6, NOTE #3 |
ANTI-THEFT |
AUDI'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
EXTRA
INFORMATION |
NOTE #1: AUDI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module,
Part # 791 Bypass and an extra ignition key for REMOTE STARTING ONLY
to order, go to the SECURITY BYPASS MODULE Page on this website
NOTE #2: on Vehicles with DRL, it is GREEN/GRAY (+) at the HEADLIGHT SWITCH, (17-PIN PLUG)
PIN 14, you will need to RELAY ISOLATE the switch so that it does not backfeed to the Ignition
NOTE #3: the CLCM, (Central Locking Control Module) is located in FRONT of the DRIVERS SEAT
Under the Carpet, in a PROTECTIVE BOX.
|
|
|
|
|