NOTE #1: This vehicle will Requires a Anti-Theft Bypass Module Part DB-ALL or XK09 to connect
the Door Locks and Bypass the PASSLOCK 2 System. If NOTE connecting up the Door
locks use the 791 BYPASS MODULE.
TO ORDER PLEASE GO TO THE INTERFACE BYPASS MODULE PAGE on this website.
NOTE #2: This vehicle has 4 door pin trigger wires, DRIVERS DOOR is a GRAY/BLACK (-) in the
DRIVERS DOOR MODULE in the DRIVERS DOOR, the PASSENGER DOOR is a
BLACK/WHITE (-) in the PASSENGERS DOOR at the PASSENGER DOOR MODULE, the
DRIVERS REAR DOOR is a LIGHT BLUE/BLACK (-) and the PASSENGERS REAR DOOR is
a LIGHT GREEN/BLACK (-) the wires are located at the FUSEBOX under the DRIVERS
REAR SEAT. When connecting to an ALARM SYSTEM use all 4 Door Trigger wires and
DIODE ISOLATE. to connect, See DIAGRAM
NOTE #3: IMPORTANT !!!!! this wire MUST BE CONNECTED as IGNITION #2
for REMOTE STARTING!!!!!!
NOTE #4 The BCM is attached to the FUSEBOX under the LEFT REAR SEAT.
|