| NOTE #1: This vehicle is equipped with a Special Anti-theft key, to remote start you will need a
Bypass module 791,(use this module IF you have a extra ignition key to place inside
the 791 to remote start, if you do not have an extra key to use or wish not to have a
key placed inside this bypass module, we OFFER a KEYLESS INTERFACE BYPASS
MODULE that does not require a key to be placed inside the bypass modlue, this is
Part # PKALL or PKFM, either one will work, to order, go to the INTERFACE BYPASS
MODULE PAGE on this website.
NOTE #2: The BCM (Body Control Module) is located on the DRIVERS SIDE REAR CAB WALL.
NOTE #3: Use the above wires on vehicles without Factory Keyless Entry, with Factory Keyless,
the wires are at the BCM, DRIVERS DOOR BLACK/YELLOW (-) Pin 4, PASSENGER
DOOR, BLACK/PINK (-) Pin 5, the DRIVERS SIDE REAR DOOR is a BLACK/LIGHT BLUE
(-) Pin 12 and the PASSENGER REAR DOOR is a BLACK/WHITE (-) Pin 13. When
connecting to an ALARM SYSTEM, use all 4 DOOR TRIGGER wires and DIODE
ISOLATE. to connect, See DIAGRAM