| NOTE#1: this vehicle will requires extra parts when connecting for the KEYLESS ENTRY System,
an extra Relay part #775 and diodes, to connect, See DIAGRAM...
NOTE #2: the BECU (Body Electronic Control Unit) is located above the DRIVERS KICK PANEL,
next to the FIREWALL.
NOTE #3: the DRIVERS DOOR is a GRAY/RED (-), GRAY Plug, Pin 15, the PASSENGER DOOR is
a LIGHT GREEN/BLACK (-) BLACK plug pin 8, the DRIVERS REAR DOOR is a
RED/WHITE (-) GRAY plug, pin 16, the PASSENGER REAR DOOR is a RED/WHITE (-)
BLACK plug pin 4. When connecting to an ALARM SYSTEM, use all (4) DOOR TRIGGER
wires and DIODE ISOLATE, to connect, See DIAGRAM.
NOTE #4; the ECM (Engine Control Module) is located behind the GLOVE BOX.
NOTE #5: THE KEYSENSE WIRE WILL DISARM THE VEHICLE WITHOUT UNLOCKING THE
DOORS BY APPLYING A (-)NEGATIVE TO THIS WIRE DURING REMOTE STARTING.