| NOTE *1 this vehicle will requires extra parts when connecting for the KEYLESS ENTRY System, an extra Relay part #R30-H and diodes, to connect, See DIAGRAM
NOTE *2 the BECU (Body Electronic Control Unit) is located above the DRIVERS KICK PANEL, next to the FIREWALL.
NOTE *3 the DRIVERS DOOR is a GRAY/RED (-), GRAY Plug, Pin 15, the PASSENGER DOOR is a LIGHT GREEN/BLACK (-) BLACK plug pin 8, the DRIVERS REAR DOOR is a RED/WHITE (-) GRAY plug, pin 16, the PASSENGER REAR DOOR is a RED/WHITE (-) BLACK plug pin 4. When connecting to an ALARM SYSTEM, use all (4) DOOR TRIGGER wires and DIODE ISOLATE, to connect, See DIAGRAM.
NOTE *4 the ECM (Engine Control Module) is located behind the GLOVE BOX.
NOTE *5 THE KEYSENSE WIRE WILL DISARM THE VEHICLE WITHOUT UNLOCKING THE DOORS BY APPLYING A (-)NEGATIVE TO THIS WIRE DURING REMOTE STARTING.
|