NOTE *1 When Installing a REMOTE STARTER, you MUST use BOTH Starter #1 and Starter #2 wires. Both wires must be connected to the STARTER/CRANKING Output wire from the Remote Starter or the vehcile will NOT Remote Start when the Engine is cold.
NOTE *2 SECU ( SMART ENTRANCE CONTROL UNIT ) IS LOCATED TO THE PASSENGERS SIDE OF THE STEERING COLUMN
NOTE *3 LIGHT GREEN (-) FOR THE DRIVER DOOR PIN 1, RED/BLUE (-) FOR PASSENGER DOOR PIN 2 , AND RED/WHITE (-) FOR THE REAR DOORS IN PIN 3 .WHEN CONNECTING TO AN ALARM SYSTEM USE ALL 3 DOOR TRIGGER WIRES AND DIODE ISOLATE, TO CONNECT, SEE DIAGRAM
NOTE *4 DO NOT START Vehicle with INSTRUMENT CLUSTER UNPLUGGED!!
|