| NOTE *1 When Installing a REMOTE STARTER, you MUST use BOTH Starter #1 and Starter #2 wires. Both wires must be connected to the STARTER/CRANKING Output wire from the Remote Starter or the vehcile will NOT Remote Start when the Engine is cold.
NOTE *2 THE LEFT FRONT DOOR IS LIGHT BLUE(-) IN PIN 62. THE RIGHT FRONT DOOR IS RED/GREEN(-) IN PIN 12. THE LEFT REAR DOOR IS RED/WHITE(-) IN PIN 63.T HE RIGHT REAR DOOR IS RED/WHITE(-) IN PIN 13. WHEN CONNECTING TO AN ALARM SYSTEM USE ALL 4 DOOR TRIGGER WIRES AND DIODE ISOLATE, TO CONNECT, SEE DIAGRAM
NOTE *3 THE BCM (Body Control Module) IS LOCATED ABOVE THE GAS PEDAL.
|