NOTE *1 When Installing a REMOTE STARTER, you MUST use BOTH Starter #1 and Starter #2 wires. Both wires must be connected to the STARTER/CRANKING Output wire from the Remote Starter or the vehcile will NOT Remote Start when the Engine is cold.
NOTE *2 TEST THESE WIRES BY TURNING KEY IN DRIVERS DOOR KEY CYLINDER.UNLOCK REQUIRES DOUBLE PULSE.
NOTE *3 THE DRIVERS FRONT DOOR IS LIGHT BLUE(-) IN PIN 14. THE 3 PASSENGER DOOR TRIGGERS ARE RED(-) IN PIN 10. WHEN CONNECTING TO AN ALARM SYSTEM USE BOTH DOOR TRIGGER WIRES AND DIODE ISOLATE, TO CONNECT, See DIAGRAM.
NOTE *4 THE BCM (Body Control Module) IS LOCATED ABOVE THE GAS PEDAL. THE BCM HAS (4) WHITE PLUGS AND (1) BROWN PLUG.
|