PART	COLOR	LOCATION
12 VOLT CONSTANT	YELLOW (+) and LIGHT GREEN/PURPLE (+)	IGNITION SWITCH HARNESS
STARTER	GREEN (+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	RED/LIGHT GREEN (+) or WHITE/YELLOW (+)	IGNITION SWITCH HARNESS
IGNITION 2	RED/BLACK (+)	IGNITION SWITCH HARNESS
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	GRAY/YELLOW (+)	IGNITION SWITCH HARNESS
ACCESSORY/HEATER BLOWER 2	BLACK/LIGHT GREEN (+)	IGNITION SWITCH HARNESS
KEYSENSE	N/A
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	BROWN (+)	@ HEADLIGHT SWITCH
POWER LOCK	WHITE/RED (Negative (-))	@ VSM, See NOTE *1
POWER UNLOCK	BLACK/WHITE (Negative (-))	@ VSM, See NOTE *1
DOOR TRIGGER	BLACK/LIGHT BLUE (+)	IN EITHER KICK PANEL
DOMELIGHT SUPERVISION	USE DOOR TRIGGER, Requires Part #R30-H Relay
TRUNK RELEASE	N/A
SLIDING POWER DOOR	N/A
HORN	BLUE (-)	@ STEERING COLUMN HARNESS
TACH	See NOTE *2	@ IGNITION COIL PACK
WAIT TO START LIGHT	See NOTE *3
BRAKE	LIGHT GREEN (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	N/A
ANTI-THEFT	FORD'S PATS ANTI-THEFT TRANSPONDER SYSTEM	TRANSPONDER @ IGNITION SWITCH TUMBLER

EXTRA INFORMATION

NOTE *1 The VSM (Vehicle Security Module) is located to the RIGHT of the Gas Pedal, just above the transmission hump below the Radio, it is not accessible from the radio opening. NOTE *2 At the COIL PACK use the wire that is NOT RED/LIGHT GREEN. NOTE *3 The DIESEL TACH wire is a GREEN/WHITE wire in a 5-wire harness held up with WHITE tape behind the parking Brake release. DO NOT USE the WAIT TO START WIRE, you will need to program the Remote Starter for the WAIT to START TIMER MODE for the DIESEL Start to work properly.