NOTE #1 This vehicle will Requires a Anti-Theft Bypass Module Part GMDL-BP to connect the
Door Locks and Bypass the PASSLOCK 2 System. If not connecting up the Door locks
use a 791 or the GMBP Bypass module.
NOTE #2: This vehicle has 4 door pin trigger wires, DRIVERS DOOR is a GRAY/BLACK (-) in the
DRIVERS DOOR MODULE in the DRIVERS DOOR, the PASSENGER DOOR is a
BLACK/WHITE (-) in the PASSENGERS DOOR at the PASSENGER DOOR MODULE, the
DRIVERS REAR DOOR is a LIGHT BLUE/BLACK (-) and the PASSENGERS REAR DOOR
is a LIGHT GREEN/BLACK (-) the wires are located at the FUSEBOX under the DRIVERS
REAR SEAT. When connecting to an ALARM SYSTEM use all 4 wires and DIODE
ISOLATE. to connect, See DIAGRAM
NOTE #3: The PCM (Power Control Module) is located on the DRIVERS SIDE of the ENGINE
NOTE #4: IMPORTANT !!!!! this wire MUST BE CONNECTED as IGNITION #2 for
REMOTE STARTING!!!!!!
|