Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2002- Mitsubishi Mirage Coupe . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
WHITE (+)
IGNITION SWITCH HARNESS
STARTER
BLACK/YELLOW (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLACK/WHITE (+)
IGNITION SWITCH HARNESS
IGNITION
2
BLUE/BLACK (+)
IGNITION SWITCH HARNESS
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
BLUE/WHITE (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
N/A
PARKING
LIGHTS ( + )
GREEN/WHITE (+)
@ TOP OF FUSEBOX, IN 12-PIN PLUG
POWER LOCK
LIGHT GREEN/BLACK (TYPE B)
@ BOTTOM OF FUSEBOX
POWER UNLOCK
BLUE/WHITE (TYPE B)
@ BOTTOM OF FUSEBOX
DOOR TRIGGER
BLACK (-)
@ TOP OF FUSEBOX, 2-PIN PLUG
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER Requires Part #775 Relay
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
N/A
TACH
See NOTE *1
WAIT TO
START LIGHT
N/A
BRAKE
GREEN (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE *1 on the 1.5L engine, use the WHITE wire at the Distributor, on the 1.8L engine, use the BLACK/YELLOW or BLACK/GREEN wire at the Ignition Coil.