Vehicle Wiring Details for a
2001 Acura CL
Item Wire Color Polarity Wire Location
12V white Positive (+) ignition harness
Starter black/white Positive (+) ignition harness
Starter 2 none
Ignition black/yellow Positive (+) ignition harness
2nd Ignition none
3rd Ignition none
Accessory yellow Positive (+) ignition harness
Accessory 2 none
Tachometer blue drivers shock tower [4]
Power Door (Lock)
Wiring Diagram for
[Negative (-)] Door Lock		 black/blue Negative (-) passenger fuse box [1]
Power Door (Unlock)
Wiring Diagram for
[Negative (-)] Door Unlock		 orange Negative (-) passenger fuse box [1]
Door Trigger black/white Negative (-) passenger fuse box
Dome Supervision
Wiring Diagram for
[] Dome		 use door trigger
Headlights blue/red Negative (-) left of steering column
Parklight Positive red/black Positive (+) passenger kick panel
Parklight Negative red/yellow Negative (-) left of steering column
Wipers blue & blue/yellow Negative (-) left of steering column
Left Front Window
(Up/Down)		 red/yel - red/blu drivers window switch
Right Front Window
(Up/Down)		 blu/wht - blu/yel RF window switch
Left Rear Window
(Up/Down)		 none
Right Rear Window
(Up/Down)		 none
Trunk/Hatch Pin blue/green Negative (-) drivers fuse box
Hood Pin yellow Negative (-) passenger fuse box
Trunk/Hatch Release
Wiring Diagram for
[Positive (+)] Trunk/Hatch		 white Positive (+) passenger MUX module [3]
Factory Alarm
(Arm)		 arms with lock
Factory Alarm
(Disarm) 		disarms with unlock
Horn lt. green/blue Negative (-) steering column
Brake white/black Positive (+) brake switch
Door Motor
(Lock) 		white/red drivers fuse box [2]
Door Motor
(Unlock)		 yellow drivers fuse box [2]
Disarm lt. green/red passenger MUX module [3]
Disarm No Unlock blue Negative (-) drivers door key cylinder
Additional Info:
This vehicle has an immobilizer system that needs to be bypassed when adding remote start. Use Commando part number TransMod. [1] Located in a green 20-pin connector. Use the key switch in the passenger door to test. [2] Located in a green 18-pin connector. [3] The passengers MUX module is located behind the glove box. [4] In a 2-pin connector near the air intake on the drivers side shock tower. [5] The cruise control module is to the right of the steering column.

ATTENTION: This wiring information is being provided free of charge and on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it by using a digital multimeter. GNU Industries, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. GNU assumes no responsibility resulting from an improper installation, even in reliance upon this information.

Copyright © 2000-2006 GNU Industries, Inc. All Rights Reserved.
一般æ¥è®²ï¼Œå¥³äººè¿‡äº†å‘育期丰胸产å“，想è¦ä¸°èƒ¸å°±ä¼šæ¯”较困难，ä¸è¿‡ä¹Ÿä¸æ˜¯ä¸è¡Œèƒ½çš„粉嫩公主酒酿蛋，这个时候需è¦å€ŸåŠ©ä¸“业的丰胸产å“，而且是å¥åº·æœ‰æ•ˆçš„丰胸产å“丰胸食物。添加WeChat获å–å…费一对一丰胸指导丰胸效果ï¼