NOTE *1 these wires are the DRIVERS DOOR KEY CYLINDER wires, to test you must meter while TURNING the KEY in the DRIVERS DOOR KRY CYLINDER.
NOTE *2 this vehicle will have (4) PINK (-) DOOR TRIGGER wires, when connecting to an ALARM SYSTEM, use all (4) DOOR TRIGGER wires and Diode Isolate, to connect, See DIAGRAM
NOTE *3 you can uses any of the following wire colors at the coils for tach: BLUE, BROWN, YELLOW, PINK or PURPLE.
NOTE *4 the CEM (Central Electronic Module) is located BEHIND the DRIVERS SIDE of the DASH
|