Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2001-2002 Suzuki Xl-7 . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
WHITE/GREEN (+)
IGNITION SWITCH HARNESS
STARTER
BLACK/RED (+) or BLACK/YELLOW (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLACK/BLUE (+)
IGNITION SWITCH HARNESS
IGNITION
2
BLUE/BLACK (+)
IGNITION SWITCH HARNESS
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
YELLOW/BLACK (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
RED/BLUE (-)
@ HEADLIGHT SWITCH
PARKING
LIGHTS ( + )
RED/YELLOW (+)
IN DRIVERS KICK PANEL
POWER LOCK
PINK (TYPE B)
@ KEYLESS Module, See NOTE *1
POWER UNLOCK
PINK/GREEN (TYPE B) See NOTE *3
@ KEYLESS Module, See NOTE *1
DOOR TRIGGER
BLACK/RED (-)
@ KEYLESS Module, See NOTE *1
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
BLUE/GREEN (-)
@ STEERING COLUMN HARNESS
TACH
BROWN
@ PCM, See NOTE *2
WAIT TO
START LIGHT
N/A
BRAKE
GREEN/WHITE (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE *1 the KEYLESS Module, is located ABOVE the DRIVERS KICK PANEL.
NOTE *2 the PCM (Powertrain Control Module) is located BEHIND the GLOVEBOX.
NOTE *3 the UNLOCK wire, may require a DOUBLE PULSE Output from the unit to UNLOCK.