NOTE *1 the DRIVERS DOOR is a BROWN/GRAY (-) Pin 6, the PASSENGER DOOR is a BROWN/BLUE (-) Pin 11, the DRIVERS REAR DOOR is a BROWN/PINK (-) Pin 10 and the PASSENGER REAR DOOR is a BROWN/WHITE (-) Pin 12, all these wires are at Connector 2, a 12 Pin Plug. When connecting to an ALARM SYSTEM use all 4 DOOR TRIGGER wires and DIODE ISOLATE, to connect, See DIAGRAM.
NOTE *2 the ECM (Electronic Control Module) is located under the hood on the passenger side, you can also use any wire at the Coils that are NOT BLACK/YELLOW or BLACK/GREEN
|