NOTE #2: the DIM Module is located just in front of the Blower motor near the Passenger Kick
panel. It has (3) Connectors tha all exit out the bottom of the module.
NOTE #3: the DRIVERS DOOR is a TAN (-) at the DRIVERS DOOR Module in the DRIVERS DOOR,
for all other DOORS there is a DARK BLUE(-) at EACH DOOR Module in EACH DOOR.
you must use all (4) wires and DIODE ISOLATE when connecting to an alarm system.
See DIAGRAM
NOTE #4: the TRUNK Release wire is located UNDER the REAR SEAT at the FUSE/RELAY BLOCK.
|