Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2000 -2003 Toyota Mr2 . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
RED (-) or RED/WHITE (-), Requires Part #R30-H Relay
IN DRIVERS KICK PANEL
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
WHITE/RED (-)
@ STEERING COLUMN HARNESS
TACH
WHITE (-)
IN DRIVERS RUNNING BOARD
WAIT TO
START LIGHT
N/A
BRAKE
GREEN/WHITE (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
TRANSPONDER ANTI-THEFT SYSTEM, REQUIRES 791 BYPASS MODULE AND EXTRA IGNITION KEY
TRANSPONDER @ IGNITION SWITCH TUMBLER
EXTRA
INFORMATION
NOTE *1 the DRIVERS DOOR is a RED or RED/WHITE(-) in the DRIVERS KICK PANEL, the PASSENGER DOOR is a RED/WHITE(-) in the PASSENGER KICK PANEL, when connecting to an ALARM SYSTEM us both DOOR TRIGGER wires and DIODE ISOLATE, to connect, See DIAGRAM.
