| NOTE *1 To get to the IGNITION SWITCH HARNESS, you MUST remove the RADIO without unplugging the radio. Make sure you catch ALL ignition wires at the back of the ignition switch.
NOTE *2 This vehicle uses a 1-Wire Door Locking System, a straight (-)Negative will UNLOCK the doors and a (-)Negative thru a 480 ohm resistor will LOCK the doors. See DIAGRAMS
NOTE *3 This vehicle has (2) door triggers the BLUE(-) is for the DRIVERS DOOR and the BLUE/WHITE (-) catches all other doors. When connecting to an ALARM SYSTEM us both wires and DIODE ISOLATE. See DIAGRAM
NOTE *4 The BCM (Body Control Module) is located above the Brake Pedal. It is a Plastic box with (3) Plugs that face the firewall of the vehicle.
NOTE *5 An extra Relay part #R30-H is need for the (-)Negative Parking Light Isolation Circuit on this vehicle. See DAIGRAM.
|