NOTE *1 When Installing a REMOTE STARTER, you MUST use BOTH Starter #1 and Starter #2 wires. Both wires must be connected to the STARTER/CRANKING Output wire from the Remote Starter or the vehcile will NOT Remote Start when the Engine is cold.
NOTE *2 THE SECU (Smart Entry Control Unit) IS LOCATED TO THE PASSENGERS SIDE OF THE STEERING COLUMN.
NOTE *3 LIGHT BLUE(-) FOR THE DRIVERS FRONT DOOR IN PIN 29. RED/BLUE(-) FOR THE PASSENGER FRONT DOOR IN PIN 40. RED/WHITE(-) FOR THE REAR DOORS IN PIN 28. WHEN CONNECTING TO AN ALARM SYSTEM USE ALL 3 DOOR TRIGGER WIRES AND DIODE ISOLATE, TO CONNECT, SEE DIAGRAM
Note #4 Must Use Relay Part #775
|