PART	COLOR	LOCATION
12 VOLT CONSTANT	RED (+)	IGNITION SWITCH HARNESS
STARTER	RED/BLACK (+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	BLACK (+)	IGNITION SWITCH HARNESS
IGNITION 2	N/A
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	YELLOW/BLACK (+)	IGNITION SWITCH HARNESS
ACCESSORY/HEATER BLOWER 2	N/A
KEYSENSE	N/A
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	GRAY/BLACK (+) and GRAY/RED (+) Use both See NOTE *1	@ HEADLIGHT SWITCH See DIAGRAM
POWER LOCK	BROWN/GRAY or RED/BROWN (Negative (-))	IN DRIVERS KICK PANEL or SECURITY MODULE See NOTE *2
POWER UNLOCK	GRAY/WHITE (Negative (-)) Requires Double Pulse	IN DRIVERS KICK PANEL or SECURITY MODULE See NOTE *2
DOOR TRIGGER	BROWN/YELLOW (-) and BROWN/WHITE (-) See NOTE *3	IN BOTH KICK PANELS
DOMELIGHT SUPERVISION	USE DOOR TRIGGER
TRUNK RELEASE	YELLOW/RED (+)	@ TRUCK RELEASE SWITCH
SLIDING POWER DOOR	N/A
HORN	BLACK/YELLOW (+)	@ HORN RELAY
TACH	GREEN/BLUE	@ INSTRUMENT CLUSTER or ECM See NOTE *4
WAIT TO START LIGHT	N/A
BRAKE	RED/BLACK (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	DISARMS WITH UNLOCK, Single Pulse Disarms
ANTI-THEFT	TRANSPONDER ANTI-THEFT SYSTEM, REQUIRES 791 BYPASS MODULE AND EXTRA IGNITION KEY	TRANSPONDER @ IGNITION SWITCH TUMBLER

EXTRA INFORMATION

NOTE *1 this vehicle uses 2 Parking Light wires you will need 2 extra Relays to connect, See DIAGRAM NOTE *2 the FACTORY SECURITY MODULE is located at the BOTTOM of the TRUNK, PASSENGER side of the vehicle. NOTE *3 the DRIVERS DOOR is a BROWN/YELLOW (-) in the DRIVERS KICK PANEL and to catch all other doors use the BROWN/WHITE (-) in the PASSENGER KICK PANEL. When connecting to an ALARM SYSTEM use both wires and DIODE ISOLATE See DIAGRAM NOTE *4 the ECM is located on the DRIVERS SIDE FIREWALL