PART	COLOR	LOCATION
12 VOLT CONSTANT	RED (+) and RED/WHITE (+)	IGNITON SWITCH HARNESS
STARTER	YELLOW (+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	PINK (+)	IGNITION SWITCH HARNESS
IGNITION 2	WHITE (+)	IGNITION SWITCH HARNESS
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	ORANGE (+)	IGNITION SWITCH HARNESS
ACCESSORY/HEATER BLOWER 2	N/A
KEYSENSE	N/A
PARKING LIGHTS ( - )	BROWN/WHITE (-)	@ BCM, See NOTE *1
PARKING LIGHTS ( + )	BROWN (+)	@ HEADLIGHT SWITCH or in DRIVERS KICK PANEL
POWER LOCK	LIGHT BLUE (Negative (-))	IN EITHER KICK PANEL, See NOTE *2
POWER UNLOCK	WHITE (Negative (-))	IN EITHER DOOR HARNESS, See NOTE *2
DOOR TRIGGER	GRAY/BLACK (-)	@ BCM, See NOTE *1
DOMELIGHT SUPERVISION	USE DOOR TRIGGER
TRUNK RELEASE	N/A
SLIDING POWER DOOR	See NOTE *3	IN EACH KICK PANEL
HORN	BLACK (-)	@ BCM, See NOTE *1
TACH	PURPLE/WHITE	@ IGNITION COIL
WAIT TO START LIGHT	N/A
BRAKE	WHITE (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	DISARMS WITH UNLOCK
ANTI-THEFT	GM's PASSKEY 3 (PK3 on Steel Shaft of Ignition Key) TRANSPONDER SYSTEM	TRANSPONDER @ IGNITION SWITCH TUMBLER

EXTRA INFORMATION

NOTE *1 the BCM (Body Control Module) is located to the RIGHT of the GLOVEBOX. NOTE *2 if vehicle is equipped with a FACTORY KEYLESS ENTRY Module, use the RED/BLACK (-) for LOCK and the ORANGE/BLACK (-) for UNLOCK, both wires will be found at the BCM, wires will only meter with the key in the Door key cylinder. You must use the 3.5 or Long door lock pulse length output. NOTE *3 the LIGHT BLUE/BLACK (-) operates the LEFT SLIDING DOOR, and a LIGHT BLUE (-) operates the RIGHT SLIDING DOOR.