Vehicle
Wiring Details for your
1999-2004 Ford Mustang Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1999-2004 Ford Mustang . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
YELLOW (+) and LIGHT GREEN/PURPLE (+) |
@ IGNITION SWITCH HARNESS |
STARTER |
WHITE/PINK (+) |
@ IGNITION SWITCH HARNESS |
STARTER
2 |
N/A |
|
IGNITION
1 |
RED/LIGHT GREEN (+) |
@ IGNITION SWITCH HARNESS |
IGNITION
2 |
RED/BLACK (+) |
@ IGNITION SWITCH HARNESS |
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
GRAY/YELLOW (+) |
@ IGNITION SWITCH HARNESS |
ACCESSORY/HEATER
BLOWER 2 |
BLACK/LIGHT GREEN (+) |
@ IGNITION SWITCH HARNESS |
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
N/A |
|
PARKING
LIGHTS ( + ) |
BROWN (+) |
@ GEM, 26-Pin Plug, Pin 7, See NOTE #2 |
POWER LOCK |
LIGHT GREEN (TYPE A) |
@ GEM, 20 Pin Plug, Pin 20, See NOTE #2 |
POWER UNLOCK |
PURPLE (TYPE A) |
@ GEM, 20 Pin Plug, Pin 18, See NOTE #2 |
DOOR TRIGGER |
YELLOW/BLACK (-) and GRAY/RED (Right) (-) Use both, See NOTE #3 |
@ GEM, 20 Pin Plig, Pins 13 and 5, See NOTE #2 |
DOMELIGHT
SUPERVISION |
BLACK/WHITE (+) |
@ GEM, 20Pin Plug, Pin 3, See NOTE #2 |
TRUNK RELEASE |
PINK/LIGHT GREEN (-) |
@ GEM, 26 Pin PLug, Pin 25, See NOTE #2 |
SLIDING
POWER DOOR |
N/A |
|
HORN |
YELLOW/LIGHT GREEN (-) |
@ GEM, 26 Pin Plug, Pin 12, See NOTE #2 |
TACH |
Any wire that is NOT RED or WHITE/LIGHT BLUE |
@ any IGNITON COIL or FUEL INJECTORS |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
RED/LIGHT GREEN (+) |
@ SWITCH ABOVE BRAKE PEDAL |
FACTORY
ALARM DISARM |
DARK GREEN/PURPLE (-) |
@ GEM, 20 Pin Plug, Pin 16, See NOTE #2 |
ANTI-THEFT |
FORD'S ANTI-THEFT TRANSPONDER SYSTEM, SEE NOTE #1 |
@ IGNITION SWITCH TUMBLER |
EXTRA
INFORMATION |
NOTE #1: This vehicle is equipped with a Special Anti-theft key, to remote start you will
need a Bypass module 791, use this module IF you have a extra ignition key to
place inside the 791 to remote start, if you do not have an extra key to use or wish
not to have a key placed inside this bypass module, we OFFER a KEYLESS INTERFACE
BYPASS MODULE that does not require a key to be placed inside the bypass module,
this is Part # PKALL or PKFM, either one will work, to order, go to the INTERFACE
BYPASS MODULE PAGE on this website.
NOTE #2: The GEM (Generic Electronic Module) is located ABOVE the DRIVERS KICK PANEL.
NOTE #3; This vehicle has 2 Door trigger wires at the GEM Module, when connecting to an
ALARM SYSTEM,use both DOOR TRIGGER wire and DIODE ISOLATE, to connect,
See DIAGRAM.
|
|
|
|
|