Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1999-2004 Chevrolet Tracker . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
WHITE/YELLOW to WHITE/GREEN (+)
@ IGNITION SWITCH HARNESS
STARTER
BLACK/YELLOW to BLACK/RED (+)
@ IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLACK/WHITE to BLACK/BLUE (+)
@ IGNITION SWITCH HARNESS
IGNITION
2
BLACK/WHITE to BLUE/BLACK (+)
@ IGNITION SWITCH HARNESS
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
YELLOW/BLACK (+)
@ IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
BLUE (+)
@ IGNITION SWITCH HARNESS
KEYSENSE
N/A
PARKING
LIGHTS ( - )
GREEN to RED/BLUE (-)
@ HEADLIGHT SWITCH
PARKING
LIGHTS ( + )
RED/YELLOW (+)
IN BLACK PLUG at FUSEBOX
POWER LOCK
PINK (TYPE A)
@ DOOR LOCK/UNLOCK RELAYS, SEE NOTE #1
POWER UNLOCK
PINK/GREEN (TYPE A)
@ DOOR LOCK/UNLOCK RELAYS, SEE NOTE #1
DOOR TRIGGER
BLACK/RED (-)
IN WHITE PLUG at FUSEBOX
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER(REQUIRES #775 RELAY)
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
BLUE/BLACK to BLUE/GREEN (-)
@ STEERING COLUMN HARNESS
TACH
BROWN (AC)
@ ECM, LOCATED BEHIND GLOVE BOX
WAIT TO
START LIGHT
N/A
BRAKE
GREEN/WHITE (+)
@ BRAKE PEDAL SWITCH
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE #1; The Door LOCK/UNLOCK Relays are located to the RIGHT of the BRAKE PEDAL,
wires are also located at the KEYLESS ENTRY MODULE located above the GAS PEDAL.