NOTE #1: remove the LIGHT SWITCH Module from the dash and remove the cover, a ribbon
cable connects the switch to the module will be exposed. With the switch facing
towards you interrupt the 4th wire from the left with a relay See DIAGRAM.
NOTE #2: the GENERAL MODULE is a WHITE box located behind the GLOVE BOX. The 54-pin
plug is the CENTER PLUG.
NOTE #3: the HORN wire is located at the HORN RELAY above the GENERAL MODULE, it is a
GREEN RELAY
NOTE #4: BMW'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module,
Part # 791 Bypass and an extra ignition key for REMOTE STARTING
Operation.
To order go to the SECURITY BYPASS MODULE Page on the website.
SPECIAL NOTE #5: For the wiring on the 1999 3-series 2-door use the information on the 1998 vehicle listings.
|