NOTE *1 When Installing a REMOTE STARTER, you MUST use BOTH Starter #1 and Starter #2 wires. Both wires must be connected to the STARTER/CRANKING Output wire from the Remote Starter or the vehcile will NOT Remote Start when the Engine is cold.
NOTE *2 LOW IN DRIVERS KICK PANEL ,THE DRIVERS DOOR IS RED (-). THE LIFTGATE IS RED/WHITE(-). IN THE PASSENGER KICK PANEL,THE PASSENGER FRONT DOOR IS RED/WHITE (-)THE SLIDING DOORS ARE RED/GREEN (-). WHEN CONNECTING TO AN ALARM SYSTEM USE ALL 4 DOOR TRIGGER WIRES AND DIODE ISOLATE, TO CONNECT, See DIAGRAM
NOTE *3 THE PCM (Powertrain Control Module) IS LOCATED BEHIND THE GLOVEBOX.
|