PART	COLOR	LOCATION
12 VOLT CONSTANT	YELLOW (+) and LIGHT GREEN/PURPLE (+)	IGNITION SWITCH HARNESS
STARTER	RED/LIGHT BLUE (+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	RED/BLACK (+) (use the Larger of the 2 wires)	IGNITION SWITCH HARNESS
IGNITION 2	BLACK/LIGHT GREEN (+)	IGNITION SWITCH HARNESS
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	GRAY/YELLOW (+) (use the Larger of the 2 wires)	IGNITION SWITCH HARNESS
ACCESSORY/HEATER BLOWER 2	N/A
KEYSENSE	N/A
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	BROWN (+)	@ HEADLIGHT SWITCH
POWER LOCK	PINK/YELLOW (5 Wire Reverse Polarity) See NOTE *1	See NOTE *1
POWER UNLOCK	PINK/LIGHT GREEN (5 Wire Reverse Polarity) See NOTE *1	See NOTE *1
DOOR TRIGGER	BLACK/BLUE (+)	Located in a GREY Molex plug, to the RIGHT of the Steering column
DOMELIGHT SUPERVISION	USE DOOR TRIGGER, Requires Part #R30-H Relay
TRUNK RELEASE	N/A
SLIDING POWER DOOR	N/A
HORN	DARK BLUE (-)	@ STEERING COLUMN HARNESS
TACH	WHITE/PINK, See NOTE *2	@ the INSTRUMENT CLUSTER or PCM
WAIT TO START LIGHT	See NOTE *2
BRAKE	LIGHT GREEN (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	N/A
ANTI-THEFT	N/A

EXTRA INFORMATION

NOTE *1 Vehicles with FACTORY KEYLESS ENTRY are a TYPE "B" Door locking system, wire are located in a GREY Molex plug on the RIGHT side of the Steering column, vehicles without FACTORY KEYLESS are a TYPE "C" Door locking system, when doing 5 Wire Reverse Polarity Locks, use the DRIVERS side SWITCH when TESTING. Wires are located in the DRIVERS DOOR HARNESS. NOTE *2 On DIESELS the TACH wire is a WHITE/PINK located at the PCM (Powertrain Control Module) or at the Main Harness that runs on the inside of the firewall to the left of the brake pedal. For WAIT TO START LIGHT, do not use the wire in the vehicle, use the 5,10,15 or 20 Second PROGRAMMABLE Wait To Start Timmer on the Remote Starter.