| NOTE *1 the BCM (Body Control Module) is located to the RIGHT of the GLOVEBOX.
NOTE *2 if vehicle is equipped with a FACTORY KEYLESS ENTRY, use the RED/BLACK (-) for LOCK and the ORANGE/BLACK (-) for UNLOCK both wires will be found at the BCM, wires will only meter with the key in the Door key cylinder. You must use the 3.5 or Long door lock pulse length output.
NOTE *3 a (-) Negative pulse on this LIGHT BLUE (-) wire will slide the door open, and another (-) Negative pulse on the same wire will close the sliding door.
|
