Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1999 -2000 Deawoo Lanos . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
PINK/BLACK (+) and RED/WHITE (+)
IGNITION SWITCH HARNESS
STARTER
RED (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
PINK (+)
IGNITION SWITCH HARNESS
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
ORANGE (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
N/A
PARKING
LIGHTS ( + )
WHITE (+)
ABOVE IGNITION HARNESS in a 4-PIN Connector
POWER LOCK
ADD ACTUATOR See NOTE *1
TO DRIVERS DOOR ONLY, See DIAGRAM
POWER UNLOCK
ADD ACTUATOR See NOTE *1
TO DRIVERS DOOR ONLY, See DIAGRAM
DOOR TRIGGER
WHITE (-)
BY FUSE BOX
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER, Requires #R30-H Relay
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
N/A
TACH
N/A
WAIT TO
START LIGHT
N/A
BRAKE
WHITE (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE *1 this vehicle uses a CENTRAL DOOR LOCKING SYSTEM, when connecting a KEYLESS ENTRY, you will need to add a Door Lock Actuator part #742 in the Drivers Door, some units will also require 2 extra relays part #R30-H See DIAGRAM