1998 Dodge Neon Vehicle Wiring Chart and Diagram

Vehicle Wiring Details for a
1998 Dodge Neon

Item	Wire Color	Polarity	Wire Location
12V	red & pink/black	Positive (+)	ignition harness
Starter	yellow	Positive (+)	ignition harness
Starter 2	none
Ignition	dk. blue	Positive (+)	ignition harness
2nd Ignition	none
3rd Ignition	none
Accessory	black/orange	Positive (+)	ignition harness
Accessory 2	none
Tachometer	tan/blue,black/gray*		top motor 3 pin plug
Power Door (Lock) Wiring Diagram for [5 Wire] Door Lock	orange/purple	5 Wire	taped harness from dr.
Power Door (Unlock) Wiring Diagram for [5 Wire] Door Unlock	pink/purple	5 Wire	door-tug to get slack
Door Trigger	yellow/black	Negative (-)	behind headlight swtch
Dome Supervision Wiring Diagram for [none] Dome	none	none	none
Headlights	lt. green	Positive (+)	at headlight switch
Parklight Positive	black/yellow	Positive (+)	at headlight switch
Parklight Negative
Wipers	grn/yel, red/yel	Positive (+)	steering column [2]
Left Front Window (Up/Down)
Right Front Window (Up/Down)
Left Rear Window (Up/Down)
Right Rear Window (Up/Down)
Trunk/Hatch Pin	gray/black	Negative (-)	at light in trunk
Hood Pin	none
Trunk/Hatch Release Wiring Diagram for [] Trunk/Hatch	none
Factory Alarm (Arm)	none
Factory Alarm (Disarm)	none
Horn	black/red	Negative (-)	steering column
Brake	white/gold dots	Positive (+)	at brake switch
Door Motor (Lock)	orange/black		drivers kick
Door Motor (Unlock)	pnk/wht or pnk/blk		drivers kick
Disarm	pink/black		passenger kick
Disarm No Unlock	none	none	none

Additional Info:
CAUTION! SRS airbag wires are not enclosed in sheath at the steering column. They are a twisted pair run with rest of ignition harness. Be careful not to cut or probe these wires. [1] Use either wire and set module to the two(2) cylinder setting. [2] Combine with diodes to get all speeds.

ATTENTION: This wiring information is being provided free of charge and on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it by using a digital multimeter. GNU Industries, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. GNU assumes no responsibility resulting from an improper installation, even in reliance upon this information.