| NOTE *1 the BCM (Body Control Module) is located to the RIGHT of the Gas Pedal, attached to the Heater box. The BCM has 3 Plugs that face the Drivers side of the Vehicle. On the BCM is printed the colors of the 3 plugs, PURPLE, BLUE and BROWN.
NOTE *2 the DRIVERS DOOR is a TAN (-) PURPLE Plug, Pin B4 and the PASSENGER DOOR is a ORANGE (-) PURPLE Plug, Pin B2. The REAR DOORS and HATCH use the same wire a DARK BLUE/WHITE (-) LIGHT BLUE Plug, Pin B11. When connecting to an ALARM SYSTEM, use all 3 wires and DIODE ISOLATE, See DIAGRAM.
NOTE *3 the PCM (Powertrain Control Module) is located on the Passenger fender, on the 2.2L engine the WHITE wire is in a BLACK 80 Pin plug, Pin 10, on the 4.3L engine the WHITE wire is in a RED 32 Pin plug, Pin 20.
NOTE *4 IMPORTANT !!!!! this wire MUST BE CONNECTED as IGNITION #2 for REMOTE STARTING!!!!!!
|