NOTE #1: this vehicle has 2 PARKING LIGHT wires that will require 2 extra relays part #775, to connect, See DIAGRAM.
NOTE #2: the ILLUMINATION CONTROL MODULE is part of the Headlight Switch.
NOTE #3: these are the DRIVERS DOOR KEY Cylinder wires when testing turn the key in the drivers door key cylinder.
NOTE #4: the PSE Control Module is in the Trunk under the Jack Box.
NOTE #5: the TRANSPONDER SYSTEM works only with vehicles that use the SWITCHBLADE KEY. If vehicle is equipped with the SMART KEY the transponder bypass will not work.
NOTE #6: this vehicle has 2 Door Trigger wires, when connecting to an ALARM SYSTEM use both wires and DIODE ISOLATE, to connect, See DIAGRAM.
|