| NOTE #1: this vehicle has 2 Parking Light wires, it will require 2 extra Relays to isolate, See DIAGRAM. You will need 2 relays one for each wire. The ILLUMINATION CONTROL MODULE is attached to the back of the HEADLIGHT SWITCH.
NOTE #2: these wires can also be found at the THEFT MODULE which is part of the Pneumatic system Equipment Control Module in the Trunk on the Passenger side.
NOTE #3: the DRIVERS DOOR is a BROWN/GRAY (-) the PASSENGER DOOR is a BROWN/BLUE (-) when connecting to an ALARM SYSTEM use both DOOR TRIGGER wires and DIODE ISOLATE, to connect, See DIAGRAM.
NOTE #4: SECURITY BYPASS MODULE 791 will ONLY WORK with vehicles that have a SWITCHBLADE KEY, on vehicles with the SMART KEY a bypass is not available.