NOTE #1: this vehicle uses 2 Parking Light wires you will need (2) extra Relays to connect,
See DIAGRAM
NOTE #2: the FACTORY SECURITY MODULE is located at the BOTTOM of PASSENGER side of
the TRUNK
NOTE #3: the BROWN/YELLOW (-) in the DRIVERS KICK PANEL is for the DRIVERS DOOR, the
BROWN/WHITE (-) in the PASSENGER KICK PANEL is for all other doors. When
connecting to an ALARM SYSTEM use both wires and DIODE ISOLATE See DIAGRAM
NOTE #4: the TACH wire is at the INSTRUMENT CLUSTER or can be found at the ECM on the
DRIVERS SIDE FIREWALL.
NOTE #5: when testing this wire, you must test while turning the key in the TRUNK KEY
CYLINDER.
|