Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1998- Chevrolet Tracker . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
WHITE/GREEN (+)
@ IGNITION SWITCH HARNESS
STARTER
BLACK/RED (+)
@ IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLACK/BLUE (+)
@ IGNITION SWITCH HARNESS
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
YELLOW/BLACK (+)
@ IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
GREEN (-)
@ HEADLIGHT SWITCH
PARKING
LIGHTS ( + )
RED/YELLOW (+)
@ RELAY, CENTER of DASH
POWER LOCK
PINK (TYPE B)
IN DRIVERS KICK PANEL
POWER UNLOCK
PINK/BLACK (TYPE B)
IN DRIVERS KICK PANEL
DOOR TRIGGER
SEE NOTE #1
DOMELIGHT
SUPERVISION
use DOOR TRIGGER, (Requires #775 Relay)
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
BLUE/BLACK with RED Dots (-)
@ STEERING COLUMN HARNESS
TACH
BROWN/WHITE (AC)
@ IGNITION COIL
WAIT TO
START LIGHT
N/A
BRAKE
GREEN/WHITE (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE #1: On the 4-door model the Door Trigger wire is a BLACK/RED (-) in a WHITE 22-PIN
PLUG, behind the Drivers Front Speaker. On the 2-door Model it is a BLACK with RED
Dots or BLACK/RED(-) behind the Drivers Rear Speaker.