| NOTE *1 the ILLUMINATION CONTROL MODULE ia attached to the back of the Headlight Switch to connect, See DIAGRAM you will need 2 relays Part #775, one for each parking light wire.
NOTE *2 to test these wires, you must incert the key in the Passenger Key Cylinder and Lock and Unlock for testing.
NOTE *3 the PSE Control Module is located under the Rear Seat on the Passenger side of the vehicle.
NOTE *4 the DRIVERS DOOR is a BROWN/GREY (-) the PASSENGER DOOR is a BROWN/RED (-), the DRIVERS REAR DOOR is a BROWN/GREEN (-) and the PASSENGERS REAR DOOR is a BROWN/BLACK (-) When connecting to an ALARM SYSTEM, use all 4 DOOR TRIGGER wires and DIODE ISOLATE, to connect, See DIAGRAM
NOTE *5 the 791 Bypass Module will ONLY work on vehicle that use the SWITCHBLADE KEY, on vehicles with the SMART KEY the bypass will not work.
|
