Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1997-2000 Dodge Dakota . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
PINK/BLACK (+) and RED (+)
@ IGNITION SWITCH HARNESS
STARTER
BLUE/YELLOW (+)
@ IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLUE (+)
@ IGNITION SWITCH HARNESS
IGNITION
2
Green/Red (+), Model Year 2000 ONLY
@ IGNITION SWITCH HARNESS
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
BLACK/ORANGE (+)
@ IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
N/A
PARKING
LIGHTS ( + )
BLACK/YELLOW (+)
BEHIND FUSEBOX
POWER LOCK
ORANGE/VIOLET or GREEN/BLACK (TYPE A), See NOTE #1
IN DRIVERS KICK PANEL
POWER UNLOCK
PINK/VIOLET (TYPE A), See NOTE #1
IN DRIVERS KICK PANEL
DOOR TRIGGER
YELLOW (-)
BEHIND FUSEBOX
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER, (Requires #775 Relay)
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
BLACK/RED (-)
@ STEERING COLUMN HARNESS
TACH
BLACK/GRAY or GRAY/BLACK (AC)
@ IGNITION COIL
WAIT TO
START LIGHT
N/A
BRAKE
WHITE/TAN (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
BLACK/ORANGE (-)
IN EITHER KICK PANEL
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE #1: vehicles without FACTORY KEYLESS ENTRY are a TYPE A Door Locking System, vehicle
WITH at FACTORY KEYLESS ENTRY are a CHRYSLER 3/5 wire Door Locking System, to
connect, See DIAGRAM