NOTE #1: Vehicles with FACTORY KEYLESS ENTRY are a TYPE "B" Door locking system, vehicles
without FACTORY KEYLESS are a TYPE "C" Door locking system, when doing TYPE C
Locks, use the DRIVERS side SWITCH when TESTING. Wires are much easier to catch
on the Passenger side of vehicle, the parking brake bracket hides the wires on the
driver side of vehicle.
NOTE #2: On DIESELS the TACH wire is a WHITE/PINK located at the PCM (Powertrain Control
Module) or at the Main Harness that runs on the inside of the firewall to the left of
the brake pedal. For WAIT TO START LIGHT, do not use the wire in the vehicle,
use the 5,10, 15 ro 20 Second PROGRAMMABLE Wait To Start Timmer on the
Remote Starter.
|