PART	COLOR	LOCATION
12 VOLT CONSTANT	YELLOW (+)	IGNITION SWITCH HARNESS
STARTER	RED/LIGHT BLUE (+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	RED/LIGHT GREEN (+)	IGNITION SWITCH HARNESS
IGNITION 2	BLACK/LIGHT GREEN (+)	IGNITION SWITCH HARNESS
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	GRAY/YELLOW (+) (2 wires, use the heavier gauge wire)	IGNITION SWITCH HARNESS
ACCESSORY/HEATER BLOWER 2	N/A
KEYSENSE	N/A
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	BROWN (+)	@ HEADLIGHT SWITCH or in DRIVERS KICK PANEL
POWER LOCK	PINK/YELLOW (5 Wire Reverse Polarity) See NOTE *1	IN EITHER KICK PANEL, See NOTE *1
POWER UNLOCK	PINK/LIGHT GREEN (5 Wire Reverse Polarity) See NOTE *1	IN EITHER KICK PANEL, See NOTE *1
DOOR TRIGGER	BLACK/BLUE (+)	IN DRIVERS KICK PANEL
DOMELIGHT SUPERVISION	USE DOOR TRIGGER, Requires Part #R30-H Relay
TRUNK RELEASE	N/A
SLIDING POWER DOOR	N/A
HORN	DARK BLUE (-)	@ STEERING COLUMN HARNESS
TACH	TAN/YELLOW, See NOTE *2	@ IGNITON COIL
WAIT TO START LIGHT	See NOTE *2
BRAKE	LIGHT GREEN (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	DARK GREEN/PURPLE (-)	IN DRIVERS KICK PANEL
ANTI-THEFT	N/A

EXTRA INFORMATION

NOTE *1 Vehicles with FACTORY KEYLESS ENTRY are a TYPE "B" Door locking system, vehicles without FACTORY KEYLESS are a TYPE "C" Door locking system, when doing 5 Wire Reverse Polarity Locks, use the DRIVERS side SWITCH when TESTING. Wires are much easier to catch on the Passenger side of vehicle, the parking brake bracket hides the wires on the driver side of vehicle. NOTE *2 On DIESELS the TACH wire is a WHITE/PINK located at the PCM (Powertrain Control Module) or at the Main Harness that runs on the inside of the firewall to the left of the brake pedal. For WAIT TO START LIGHT, do not use the wire in the vehicle, use the 5,10, 15 ro 20 Second PROGRAMMABLE Wait To Start Timmer on the Remote Starter.