Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1996 -1998 Harley-davidson Electra Glide Classic . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
RED (+)
@ BATTERY
STARTER
GREEN (+)
@ RELAY, behind BATTERY
STARTER
2
N/A
IGNITION
1
ORANGE/WHITE (+)
Above FUSE BOX
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
N/A
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
N/A
PARKING
LIGHTS ( + )
PURPLE (+) and BROWN (+) Use Both See NOTE *1
In Harness above FUSE BOX
POWER LOCK
N/A
POWER UNLOCK
N/A
DOOR TRIGGER
N/A
DOMELIGHT
SUPERVISION
N/A
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
TACH
WAIT TO
START LIGHT
N/A
BRAKE
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE *1 These are the TURN SIGNAL wires and must be Isolated using Relays See DIAGRAM
