NOTE #1: IMPORTANT !!!!! this wire MUST BE CONNECTED as IGNITION #2 for
REMOTE STARTING!!!!!!
NOTE #2: If vehicle is a 2-Door it is a TYPE C Door Lock System, if the vehicle is a 4-Door,
it is a TYPE A Door locking System.
NOTE #3: The ECM (Engine Control Module) is located on the DRIVER SIDE INNER FENDER.
The TACH wire is in a BLACK plug labled "WHITE"
NOTE #4: if vehicle has a LIFT GATE, it is a (+) Positive hatch release, if vehicle has a CARGO
DOOR, it is a 5-Wire System, will also require an extra Relay part #775, to connect
See DIAGRAM
NOTE #5: when hooking up a remote starter, if you cannot get the (+) or (-) Wait to Start
wire on the Remote Starter to work properly, you will then need to disconnect this
wire and Program the Remote Starter for the 5, 10, 15 or 20 Second Wait to Start
Timmer in the Installation manual.
|