PART	COLOR	LOCATION
12 VOLT CONSTANT	RED (+)	IGNITION SWITCH HARNESS
STARTER	PURPLE (+) or YELLOW (+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	PINK (+)	IGNITION SWITCH HARNESS
IGNITION 2	PINK/WHITE (+) or WHITE (+) See NOTE *5	IGNITION SWITCH HARNESS
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	ORANGE (+)	IGNITION SWITCH HARNESS
ACCESSORY/HEATER BLOWER 2	N/A
KEYSENSE	N/A
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	BROWN (+)	@ HEADLIGHT SWITCH
POWER LOCK	LIGHT BLUE (5 Wire Reverse Polarity) See NOTE *1	IN EITHER DOOR HARNESS
POWER UNLOCK	WHITE (5 Wire Reverse Polarity) See NOTE *1	IN EITHER DOOR HARNESS
DOOR TRIGGER	PURPLE (-)	@ HEADLIGHT SWITCH
DOMELIGHT SUPERVISION	WHITE (-), Requires Part #R30-H Relay	@ HEADLIGHT SWITCH
TRUNK RELEASE	BLACK (+), Requires Part #R30-H Relay	@ RELEASE SWITCH
SLIDING POWER DOOR	N/A
HORN	BLACK (-)	@ STEERING COLUMN HARNESS
TACH	PURPLE/WHITE, See NOTE *3	@ ECM, See NOTE *2
WAIT TO START LIGHT	DARK BLUE (+) See NOTE *4	@ INSTRUMENT CLUSTER
BRAKE	WHITE (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	N/A
ANTI-THEFT	N/A

EXTRA INFORMATION

NOTE *1 If vehicle is a 2-Door it is a 5 Wire Reverse Polarity Door Lock System, if the vehicle is a 4-Door, it is a Positive (+) Door locking System. NOTE *2 The ECM (Engine Control Module) is located BEHIND and to the RIGHT of the GLOVEBOX NOTE *3 For a TACH wire on a DIESEL use the WHITE wire at the ALTERNATOR or INSTRUMENT CLUSTER. NOTE *4 when hooking up a remote starter, if you cannot get the (+) or (-) Wait to Start wire on the Remote Starter to work properly, you will then need to disconnect this wire and Program the Remote Starter for the 5, 10, 15 or 20 Second Wait to Start Timmer in the Installation manual. NOTE *5 IMPORTANT !!!!! this wire MUST BE CONNECTED as IGNITION #2 for REMOTE STARTING!!!!!!