NOTE *1 the HIDDEN RELEASE TAB for the HEADLIGHT SWITCH is on the Upper LEFT SIDE of the switch.
You MUST CUT both of the PARKING LIGHT WIRES and ISOLATE the SWITCH side of the wires with a RELAY PART #775 so that the switch does not see (+) 12 volts. You can also use the Hazard wires the BLACK/WHITE and BLACK/GREEN these are (+) Positive wires and are located at the STEERING COLUMN. Requires (2) RELAYS PART #775, to connect, See DIAGRAM.
NOTE *2 the GRAY wire is grounded by the HATCH RELEASE SWITCH at rest, cut this wire in half and use a RELAY PART#775 to isolate the switch side of the trunk release wire from seeing (+) 12volts. to connect, See DAIGRAM.
NOTE *3 the ALARM MODULE, is located BEHIND the HEADLIGHT SWITCH.
NOTE *4 the TRANSPONDER ANTI-THEFT SYSTEM is only on some 2000 MODEL YEAR VEHICLES.
|