Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1995-2000 Dodge Avenger . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
WHITE (+)
@ IGNITION SWITCH HARNESS
STARTER
RED/BLACK (+)
@ IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLACK/WHITE (+)
@ IGNITION SWITCH HARNESS
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
BLUE/BLACK (+)
@ IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
GREEN/WHITE (-) Thin wire
@ STEERING COLUMN HARNESS
PARKING
LIGHTS ( + )
GREEN/WHITE (+)
IN DRIVERS KICK PANEL
POWER LOCK
BROWN/WHITE (TYPE B)
IN DRIVER KICK PANEL at DOOR HARNESS
POWER UNLOCK
BROWN (TYPE B)
IN DRIVER KICK PANEL at DOOR HARNESS
DOOR TRIGGER
RED/GREEN (-)
IN DRIVERS KICK PANEL
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER, (Requires #775 Relay)
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
BLACK/GREEN (-)
@ STEERING COLUMN HARNESS
TACH
WHITE (AC)
@ PCM, See NOTE #1
WAIT TO
START LIGHT
N/A
BRAKE
GREEN/BLACK (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
GREEN/WHITE (-), See NOTE #2
IN DRIVERS DOOR HARNESS
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE #1: the PCM (Powertrain Control Module) is located on the Drivers Sid of the engine
compartment or behind the center of the dash, depending on the engine.
NOTE #2: Test this wire while turning the key in the DRIVERS DOOR KEY CYLINDER.